XO FLEX - TECHNICAL SPECIFICATIONS

1 XO FLEX UNIT IN GENERAL


XO FLEX is a dental treatment unit with:

  • A compact floor-mounted unit stand with lifting mechanism for XO Patient Chair (side lift)
  • A cuspidor
  • A single-column pivoting articulated balanced arms for instrument bridge, operating light and display

The unit is designed with over-the-patient delivery of unit instruments for working primarily on supine patients in order to obtain healthy working conditions and efficient workflow.
The user interface is yielding maximum focus on the oral cavity and optimal infection control.
Designed and manufactured in Denmark.
Please note: XO Patient Chair must be ordered separately!
XO FLEX unit with lifting mechanism for XO Patient Chair (XO-102)

1.1 UNIT STAND

The unit stand is manufactured in steel and aluminum with:

  • Service panels for easy access to XO Water Clean, XO Suction Disinfection and auxiliary connections
  • Detachable aluminum side covers for easy service access
  • Two buttons located on the top of the unit stand for patient activation of cuspidor flush and cup filler

1.2 WATER AND AIR SYSTEM

All incoming water is filtered (50 μm), eliminating particles from main water supply.
Incoming compressed air is filtered (5 μm).
A main water valve automatically switches water on/off when activating the main switch. A leakage sensor provides automatic shut-off of water supply if an internal water leak is detected.
An integrated water softener decarbonizes water for use in the XO unit and protects the internal components of the unit by reducing the limescale content. Furthermore, the taste of the water is improved by removing unpleasant odors and tastes, e.g. chlorine.

1.3 CUSPIDOR AND CUP FILLER

Detachable and thermodisinfectable cuspidor bowl in glass with gold trap.
Swiveling stainless steel faucet with safety switch allowing easy removal of cuspidor bowl for cleaning.
Detachable and thermodisinfectable cup holder and stainless steel faucet.

1.4 ARTICULATED BALANCED ARMS

Arms for instrument bridge, operating light and XO HD Display pivoting on one vertical column.
Arms manufactured in aluminum and connected via slim joints with roller bearings.
Adjustable and maintenance-free balance spring and friction brakes for smooth and effortless operation.
Steel covers fitted with magnets.

1.5 INSTRUMENT BRIDGE

Fitted with up to six detachable unit instruments:

  • The 3-/6-function syringe is placed to the left (near the dental assistant) or to the right (unit for left-handed dentists)
  • All other unit instruments may be placed as required by the end users
  • When ordering the unit please specify where the different instruments should be placed
  • After delivery it is possible for a technician to rearrange the instruments on the bridge

The instrument bridge is supplied with:

  • A detachable instrument pad
  • A detachable bridge protection pad
  • Two autoclavable handles
  • A display
  • A speaker with adjustable volume providing acoustic signals to the operator
  • A programming button

The instrument bridge is prepared for a hand-instrument table.

1.6 INDIVIDUALLY BALANCED AND DETACHABLE UNIT INSTRUMENTS

Depending on the weight of the instrument, the instrument suspension is individually adjusted for optimal balance.
All unit instruments are fitted with a plug and may be attached/detached by the users for cleaning and disinfection – without using tools.

1.7 INSTRUMENT BRIDGE DISPLAY

At the front of the instrument bridge a display for monitoring instrument data is fitted. The light intensity of the display text field is adjustable.
The display consists of:

  • One 8-digit text field: Indication of the maximum preset value of the primary instrument parameter (for example speed) when the instrument is lifted forward, but not activated – and the current value of this primary parameter when the instrument is activated
  • Three green LEDs for indication of selected amount (three levels) of spray water or for spray water off
  • One blue LED: Indication of spray air on/off
  • One white LED: Automatic chip blow enabled/disabled

1.8 HANDS-FREE OPERATION

All functions of XO FLEX unit, patient chair and instruments are controlled hands free using the foot control and/or chair base joystick.

1.9 FOOT CONTROL

The foot control is fitted with a pedal and joystick.
When all unit instruments are at rest the foot control manages functions related to the unit and chair etc.
When a unit instrument is lifted forward the foot control manages this active instrument.
The pedal can be activated in three directions (left, right and down).
The joystick can be activated in four directions (north, east, west and south).
In addition, the foot control is equipped with two activation buttons and a hoop in stainless steel.

1.10 CONTROL OF MICRO MOTOR

Speed control method: Variable.
Selection between three (maximum) speed levels in the range 100 – 40,000 RPM + 20%.

1.11 ELECTRONIC CONTROL OF “AIR” (TURBINE OR AIR SCALER, FOR EXAMPLE) INSTRUMENT

Speed (power) control method: One-step.
Selection between three speed/power levels.

1.12 ELECTRONIC CONTROL OF SPRAY WATER AND AIR

The amount of spray (irrigation) water and air is controlled electronically using proportional solenoid valves.
The spray water may be adjusted in the range: 10 – 70 ml/min ± 20% depending on the dimensions of the spray pipes in the attached instruments.
Spray air can be set between 0 – 100% of maximum.

1.13 AUTOMATIC CHIP BLOW

Short blast of high-pressure chip air each time an instrument with spray water stops. Keeps the preparation dry and helps the operator focus on the work task.

1.14 CONTROL OF SCALER

Control method: One-step.
With selection between three power levels.
Irrigation water for scalers may be adjusted in the range: 10 – 90 ml/min ± 20%.
Selection between three irrigation water levels (and no irrigation).

1.15 CHAIR BASE JOYSTICK

In addition to the foot control, a chair base joystick for controlling the patient chair is fitted.

1.16 AUTOMATIC FUNCTIONS

The following optional automatic functions are available:

  • Operating light on/off automatically when the patient chair reaches/leaves working position
  • Cuspidor rinse starts automatically when cup filler stops
  • Cuspidor rinse starts automatically when the patient chair reaches the rinse position

1.17 SOFTWARE CONTROL

All XO FLEX functions are software controlled.
Latest software (firmware) version is 4.00, released 2016-10-01.

1.18 CONFIGURATION

The user may configure:

  • Patient chair: Position 1 and 2 as well as rinse position
  • Micro motor:
    • Maximum speed (3 levels)
    • Amount of spray water (3 levels)
    • Amount of spray air (% of maximum)
  • Air instrument (turbine)
    • Speed/power (3 levels)
    • Amount of spray water (3 levels)
    • Amount of spray air (% of maximum)
  • Scaler:
    • Power (3 levels)
    • Amount of irrigation water (3 levels)
  • Light curing lamp: Curing time (3 selections) and soft start
  • Peristaltic pump: Selection of instrument to be attached
  • Cuspidor flush: Time
  • Cup filler: Time
  • Enable/disable automatic operating functions of:
    • Cup filler
    • Cuspidor
    • Operating light
  • Enable/disable control of operating light with foot control

1.19 XO FLEX FOR LEFT-HANDED DENTIST 

Left-handed configuration is obtained by fitting the:

  • 3- or 6-function syringe on the right side of the instrument bridge
  • Suction hose holder on the right side of the patient chair

1.20 ASEPSIS, CROSS INFECTION, CLEANING AND ENVIRONMENTAL CONTROL FEATURES

XO FLEX is designed with smooth and easy-to-clean surfaces.
Metal parts of XO FLEX are painted using an antimicrobial powder coat. A combination of agents with nanoscale silver gives a long-term protection against formation of bacteria and fungi on the surfaces.
The unit is supplied with autoclavable handles, suction nipples, cover for instrument holder and XO Patient Tray.
Other XO FLEX features that enhance asepsis and reduce environmental footprint:

  • Hands-free user interface
  • Automatic chip blow
  • XO Water Clean
  • Backflow prevention
  • XO Suction Disinfection
  • Automatic functions

All surfaces and XO Comfort fabric may be disinfected and/or cleaned with:

  • XO Quick Disinfection – for disinfection of all surfaces – 6 x 1 liter (AP-831)
  • XO Gentle Disinfection – for disinfection of sensitive surfaces – 6 x 1 liter (AP-832)
  • XO Fabric Make Up – for cleaning and care of fabric surfaces on patient chair and operators’ seats – 1 x 0.5 liter (AP-833)

1.21 INSTALLATION REQUIREMENTS

  • Mains supply: 230 VAC ± 10%, 50 – 60 Hz with earth. Main fuse min. 10 A
  • Suction motor control cable: Min. 2 x 0.08 mm2 and max. 2 x 0.5 mm2. Max. 2 A / 60 V DC or 2 A / 25 V AC
  • Suction motor capacity: < 300 liters/min.
  • Assistant call control cable: Min. 2 x 0.08 mm2 and max. 2 x 0.5 mm2. Max. 2 A / 60 V DC or 2A / 25 V AC
  • Equipotential earth 1 x 4.0 mm2. To be connected if required by national law
  • Water:
    • Pipe with 3/8” female internal thread – preferably fitted with a ball valve
    • Inlet pressure 2.5 – 6 bar
  • Air:
    • Pipe with 3/8” female internal thread – preferably fitted with a ball valve
    • Inlet pressure 5.5 – 8 bar
  • Drain: Plastic pipe Ø 32 mm with socket
  • Suction: Plastic pipe Ø 32 mm with socket
  • XO FLEX is to be fixed to the floor with 5 bolts
  • XO FLEX requires a floor surface of less than 8 m2 cabinets – see section 15.1

1.22 MAINTENANCE, TECHNICAL SERVICE, WARRANTY AND EXPECTED LIFETIME

XO FLEX is to be maintained as prescribed in the supplied documentation.
A preventive service checkup is to be performed by a certified technician at intervals of 12 months.
When it is time for service a message is displayed in the bridge display.

  • A Service including checkup and exchange of parts contained in A service kit – 12 months, 36 months etc. after installation – expected labor: 1.5 hours
  • B Service including checkup and exchange of parts contained in B service kit – 24 months, 48 months etc. after installation – expected labor: 3.5 hours

When the preventive service checkups have been carried out according to the guidelines, the warranty is extended from 12 to 36 months after installation.
XO FLEX unit has an expected lifetime of at least 10 years (guaranteed delivery of spare parts and technical back up). Components such as intraoral video cameras, PC screens etc. may have a shorter life.

1.23 ENVIRONMENTAL REQUIREMENTS

Operating conditions:

Temperature: +15°C – +40°C
Relative humidity: 20% – 95%
Air pressure: 700 hPa – 1060 hPa

Transport and storage conditions:
Temperature: -40°C – +60°C
Relative humidity: 10% – 95%
Air pressure: 700 hPa – 1060 hPa

1.24 LEGAL

XO FLEX is designed for use by dentists and other qualified personnel for prevention and treatment of human teeth diseases.
XO FLEX unit:

  • Is in compliance with relevant requirements concerning class IIa equipment in Council Directive 93/42/EEC on medical devices
  • Has been developed, manufactured, and handled in accordance with ISO 13485
  • XO FLEX fulfills requirements of:
    • EN 60601-1
    • EN 60601-1-2
    • EN 1640

1.25 UNIT COLORS

Color of unit base and columns: XO Silver (IGP 6802/gloss 20).
Color of unit stand, arms for bridge, light and screen, instrument bridge and operating light: Traffic White (RAL 9016/gloss 20).
Color of handles, instrument bridge pad, suction, foot control and other details: Black Grey (RAL 7021).
Please note: Minor differences in color of different parts of the product may occur due to different materials and different paint processes.
Please note: Exposure to sunlight may change colors over time.
XO Silver (IGP 6802/gloss 20) & Traffic White (RAL 9016/gloss 20) (XB-935)

xosilver
IGP 6802
RAL 9016
RAL 9016
blackgrey
RAL 7021 Note: Slight color differences may occur.

2 UNIT INSTRUMENTS FOR XO FLEX

2.1 3-/6-FUNCTION SYRINGE – LUZZANI MINILIGHT

3-function syringe supplies non-heated water, air or spray.
6-function syringe supplies heated or unheated water, air or spray.
An XO FLEX unit must have one and only one syringe that must be placed in the leftmost or rightmost position of the instrument bridge.
Specifications – see luzzani.eu.
Luzzani Mini Light 3-function syringe (XO-010)
Luzzani Mini Light 6-function syringe (XO-011)
Syringe on right side of the instrument bridge – for left-handed dentists (XO-012)

2.2 AIR INSTRUMENT (TURBINE) CONNECTION

For turbine hand-piece or other types of air instruments (e.g. air scalers and polishers).
Hose with Midwest 4+2 coupling.
Air instrument (turbine) connection (Midwest 4+2) (XO-021)

2.3 BIEN AIR MC3 MICRO MOTOR

The Bien Air MC3 is a general purpose micro motor with internal spray.
The MC3 motor is available with and without LED light.
Specifications – see bienair.com.
Bien Air MC3 micro motor (XO-041)
Bien Air MC3 micro motor with LED light (XO-046)

2.4 BIEN AIR MX2 MICRO MOTOR

Bien Air MX2 motor is a high performance brushless micro motor.
Specifications – see bienair.com.
Bien Air MX2 micro motor with LED light, first motor incl. PCB (XO-032)
Bien Air MX2 micro motor with LED light, second or following motor (XO-033)

2.5 XO ODONTOSON 360 ULTRASONIC SCALER

A very gentle and efficient ultrasonic scaler with:

  • Magnetostrictive oscillation principle (ferrite rod)
  • Two-dimensional circular instrument tip movement
  • Small amplitude of instrument tip: 10 – 20 µm
  • High frequency: 42.000 Hz
  • Instruments consisting of a hand-crafted titanium tip fitted with an exchangeable ferrite rod
  • Interchangeable instruments – without use of tools

Supplied with six instruments fitted into two autoclavable instrument holders in Teflon:

  • Universal instrument (209080) – 2 pieces
  • Perio instrument (209030)
  • Thin Line Straight instrument (209034) – 2 pieces
  • Heavy Duty Straight instrument (209010)

 Service kit with:

  • Ferrite (209100)
  • Steel pin (209300) and clamp wrench (309300) for tightening or exchange of ferrite
instruments-and-service-kit-supplied-with-xo-odontoson-360_2

Instruments and service kit supplied with XO ODONTOSON 360

XO ODONTOSON 360 ultrasonic scaler with 6 instruments (XO-068)

2.6 KIT FOR EXTERNAL IRRIGATION XO ODONTOSON 360

Accessories for connecting XO ODONTOSON 360 to a built-in peristaltic pump.

Includes:

  • Intermediate hand-piece part with external irrigation connection
  • Support for irrigation reservoir
  • Spear for irrigation reservoir

Please note: XO ODONTOSON 360 may in combination with XO Peristaltic Pump be used for non-surgical periodontal therapy – see xo-care.com for details.

photo 02

Kit for external irrigation XO ODONTOSON 360

 

Kit for external irrigation XO ODONTOSON 360 – requires XO-051 and XO-053 (XO-069)

2.7 EMS PIEZON NO PAIN SCALER

EMS Piezon No Pain scaler; incl. hand-piece, instruments A, P and PS.
Specifications – see ems-company.com.
EMS Piezon No Pain scaler (XO-066)
EMS Piezon No Pain scaler with LED light (XO-067)

2.8 SATELEC SCALER

SP Newtron, incl. hand-piece, instruments 1, 2, 10P.
Specifications – see acteongroup-products.com.
Satelec SP Newtron scaler (XO-065)

2.9 XO ODONTOCURE CURING LIGHT

LED polymerization light featuring high output power and short curing time:

  • Wavelength: 385 – 515 nm
  • Radiant exitance: 1650 mW/cm2 + 10%
  • Three preset curing times
  • Acoustic signal every 5 seconds
  • Optional soft-start feature with reduced (20% of normal) curing power

Supplied with:

  • 1 x Fiber glass rod (AP-915)
  • 1 x UV filter (AP-916)
  • 5 x Protection caps (AP-917)
  • 100 x Cross infection protection sleeves (AP-918)
  • 1 x Testing device (MN-451) for measuring curing effectiveness
photo 03

Accessories XO ODONTOCURE

 

Please note: Benchmark tests of XO ODONTOCURE under standardized conditions has demonstrated superior curing efficacy with deeper polymerization depth and shorter curing time in comparison with polymerization lights previously supplied by XO CARE – please visit xo-care.com for more information.

XO ODONTOCURE curing light (XO-076)

2.10 HD INTRAORAL VIDEO CAMERA

The camera is supplied with a hand-piece, an interchangeable camera head, 20 single-use protection sleeves and a demo version of Dürr DBSWIN imaging software (full license available from Dürr for free upon request).

Please note:

  • This intraoral camera must be attached to an external PC using a special USB cable supplied by Dürr Dental! USB cable connection from the instrument bridge to the unit stand included.
  • If the unit and external PC are also connected by means of a serial cable, the foot control can be used to control the camera from inside Dürr DBSWIN or Soredex Digora by means of a small software utility program available from xo-care.com.

Specifications and requirements – see duerrdental.com.
Other accessories available from Dürr Dental.
Dürr VistaCam iX HD (XO-086)

2.11 EMPTY SPACE BETWEEN TWO INSTRUMENTS

Needed if fewer than 6 unit instruments are installed and the user requires an “empty space” between two instruments.
Empty space between two instruments (XO-015)

2.12 XO PERISTALTIC PUMP

Supplies sterile saline or antimicrobials to a selected unit instrument.
Irrigation flow rate: 10 – 90 ml/min ± 10%.
Can be used to supply external irrigation to micro motors and XO ODONTOSON 360 fitted with “Kit for external irrigation” on XO FLEX unit. When the chosen instrument is activated the peristaltic pump automatically starts providing the selected amount of irrigation (sterile saline or antimicrobial solution from reservoir).
Please note that the irrigation hoses must be fitted to the chosen instruments manually.

Includes:

  • Peristaltic pump casing with bag hanger
  • 5 clips for disposable irrigation tube
  • Guide for disposable irrigation tube attached with magnets to XO FLEX arm
  • Disposable irrigation kit – 2 pieces

Please note: Requires Preparation for XO Peristaltic Pump (XO-051).

photo 04
Parts supplied with XO Peristaltic Pump
 

XO Peristaltic Pump – requires XO-051 (XO-053)

2.13 PREPARATION FOR PERISTALTIC PUMP

Please note: This preparation is a prerequisite for attaching an XO Peristaltic Pump to XO FLEX unit.
One single XO Peristaltic Pump may be shared among several XO FLEX units equipped with XO-051.
Preparation for XO Peristaltic Pump (XO-051)

3 SUCTION

3.1 SUCTION WITH SUCTION DISINFECTION

The suction system includes:

  • Two very light and flexible suction hoses:
    • Individually controlled – each suction hose starts/stops when lifted out of/placed in the holder
    • a flushing system that automatically rinses the suction hoses when they are active
    • With easy-to-clean filters
    • With detachable and autoclavable suction nipples
  • A suction hose holder on XO Patient Chair with:
    • Auto return design – the suction hoses glide perfectly into resting position after use
    • Duo/Solo positions
    • Detachable and autoclavable handle
  • XO Suction Disinfection

XO Suction Disinfection is a highly effective preparation for the simultaneous disinfection, deodorization, cleaning and care of the suction system.
The system reduces the number of microorganisms in the suction system. It consists of a dispensing pump and a disinfectant cartridge holder. The cartridge holder is accessible from the outside through a service panel and allows for quick and easy replacement of disinfection cartridges by the clinic personnel.
Range of action: Bactericidal incl. tuberculocidal, fungicidal, limited virucidal and non-enveloped viruses: Adeno, Noro.
Specifications – see XO Suction Disinfection safety data sheet.
The users are notified on the instrument bridge display when the level of disinfectant is low.
The disinfection liquid used by XO Suction Disinfection is available in cartridges containing 0.6 liter.
Suction with XO Suction Disinfection – without cartridges – holder on the left side of XO Patient Chair (XO-221)
Suction with XO Suction Disinfection – without cartridges – holder on the right side of XO Patient Chair for left-handed dentist (XO-222)
Suction with XO Suction Disinfection – without cartridges – holder on both sides of XO Patient Chair for left- and right-handed dentist (XO-223)
No suction (XO-299)
XO Suction Disinfection cartridges 6 x 0.6 liter (AN-354)

3.2 DRY/WET SUCTION SOLUTIONS

The suction system of the unit may be attached to either a wet suction system or a dry suction system.
Choose one of the following solutions:
Dürr CS 1 Combi-Sepamatic – dry suction system (XO-210)
Dürr CAS 1 Combi-Separator with amalgam separator – dry suction system (XO-211)
Dürr cuspidor valve – wet suction system (XO-212)

4 WATER ACCESSORIES

4.1 XO WATER CLEAN

XO Water Clean continuously dispenses a solution of non-toxic disinfectant containing hydrogen peroxide (working strength solution contains 0.0235% hydrogen peroxide) to the procedural water. The disinfectant is proven to keep the number of microorganisms in the unit at a level suitable for drinking water. The cartridge holder is accessible from the outside through one of the service panels and allows for quick replacement of disinfection cartridges by clinic personnel. The users are notified on the instrument bridge display when the level of disinfectant is low.

XO Water Clean further hinders limescale from forming by binding the calcium carbonate.
XO Water Clean is supplied with a disinfection instrument holder.
Two types of disinfection routines are available:

Overnight disinfection:

  • At the end of the work day the water container and unit’s waterlines are emptied
  • At the beginning of the next work day the water container is filled and the unit water lines are flushed with disinfectant

Intensive disinfection for use after weekends, holidays or longer periods where the unit has not been used:

  • The water tank is emptied
  • The water tank is filled again using a double dose of disinfectant
  • The unit water lines are flushed with a double dose of disinfectant

The disinfection liquid used by XO Water Clean is available in cartridges containing 0.6 liter (enough for 60 liters of procedural water).
Specifications – see XO Water Clean safety data sheet.
Please note: XO Water Clean requires installation of backflow prevention (XO-305).
Please note: XO Water Clean cannot be installed on units without cuspidor (XO-470).
XO Water Clean – without cartridges – requires XO-305; not possible with XO-470 (XO-450)
XO Water Clean cartridges – 6 x 0.6 liter (AO-980)

4.2 BACKFLOW PREVENTION

The backflow prevention provides a vertical air gap of 20 mm for preventing procedural water from flowing back into the municipal water supply system.
It contains a water tank with a capacity of approx. 1 liter that provides pressure to the water that has passed through the air gap. The water tank is filled when there is no demand for procedural water.
A suitable method for preventing contaminants from flowing back into the municipal water supply is required by law within the EU. Without the backflow module the XO unit does not fulfill the requirements of ISO 7492-2 and EN 1717.
The backflow module can be omitted in situations where another suitable backflow prevention mechanism is installed between the unit and the municipal water supply and when the XO Water Clean is not required.
Please note: Backflow prevention is a prerequisite for the XO Water Clean (XO-450).
Unit backflow prevention – XO-450 strongly recommended (XO-305)

4.3 WATER HEATER

Provides tempered water for unit instruments and cup filler.
To be used in areas where the tap water is very cold.
Please note: XO Water Clean (XO-450) should be installed on units with water heater.
Water heater – XO-450 strongly recommended (XO-455)

4.4 NO CUSPIDOR AND CUP FILLER

The XO FLEX unit may be supplied without cuspidor and cup filler.
Please note: XO Water Clean (XO-450) cannot be installed on units without cuspidor and cup filler.
Please note: Delivery time for XO FLEX units without cuspidor is at least 8 weeks.
No cuspidor and cup filler (XO-470)

5 HAND INSTRUMENT TABLES

5.1 FOR UNIT

Rotatable and detachable hand instrument table in anodized aluminum placed below the instrument bridge.
XO Hand Instrument Table for 1 norm tray with holder mounted under instrument bridge (XO-005)
XO Hand Instrument Table for 2 norm trays with holder mounted under instrument bridge (XO-006)

5.2 FOR CABINET

Rotatable and detachable hand instrument table in anodized aluminum for installation in a cabinet at approximately 12 o’clock position for efficient four-handed and solo work.
Please see installation plan in section 15.1.
Please note: The holder for this hand instrument table is to be fitted in a drawer or table top with a thickness of 5-7 mm.
See Dental Treatment Room – Design Guide.
XO Hand Instrument Table for 2 norm trays with holder for adaptation on a cabinet at 12 o’clock (XO-007)

6 Quick connections

The XO FLEX unit may be equipped with quick connections that are accessible through the service panels on the unit stand.
Please note: Maximum two of the below listed options are possible.
Quick connection air (XO-330)
Quick connection tap water (XO-331)
Quick connection hydrocolloid (XO-332)

7 Installation accessories

Steel plate (2017 version) for installation of XO unit to be used if the unit cannot be fixed directly to the floor or if the floor construction is too unstable. Color: Silver (IGP 6802/gloss 20).
Please note: XO units installed using steel installation plate may not be equipped with adaptor for intraoral X-ray unit.

photo 05

Steel installation plate for XO units (2017 version)

Steel (2017 version) installation plate for XO units in XO Silver (IGP 6802/gloss 20) – cannot be used on units with adaptor for intraoral X-ray unit (XO-492)

Separation transformer with 6 x 230 VAC (600 W) – required for supplying an external PC (incl. attached items such as displays) connected to the XO FLEX unit in order to comply with electrical safety regulations.
Separation transformer with 6 x 230 V outlets (XO-620)

8 Operating Light  

XO Operating Light with 2nd generation LED technology incl. reflector yielding a shadow free light.
Long arm and head fitted with 3 axis (allowing the light to be parallel to the viewing direction).
Detachable and autoclavable handles and easy to clean protection screen.
XO Operating Light has been developed in accordance with the requirements of ISO 9680.

Specifications:

  • Light intensity: 3 levels: 15,000, 21,000 and 30,000 Lux + 20%
  • Color rendering index (CRI): ~ 95 (ISO 9680 requires a CRI of 93 or greater for color matching)
  • Color temperature: ~5.500 Kelvin
  • Power consumption: 7 Watt (no cooling fan)
  • Expected lifetime of LED: 10 years

XO Operating Light (XO-503)

9 Display

XO HD Display is a computer display integrated with XO FLEX using a short arm or a double articulated arm.
The double arm features a set of detachable and autoclavable handles.

Specifications:

  • 22” Full HD LED display
  • Wide-screen aspect ratio (16:9)
  • Wide range of resolutions supported (up to 1920 x 1080)
  • Housing coated with antibacterial paint and splash-proof front
  • Supplied with HDMI cable from display to unit stand

Please note: XO HD Display must be connected to an external PC with a HDMI interface.

photo 06

XO HD Display with double articulated arm and handles

photo 07

XO HD Display with short arm

 

XO HD Display with double articulated arm and handles (XO-614)
XO HD Display with short arm (XO-615)

10 Adaptors for intraoral X-ray unit

Stable X-ray adaptor integrated into the main pillar of the unit.
Please note: The X-ray adaptor may not be used on XO units installed using the steel installation plate (XO-492). The weight of the x-ray unit head may not exceed 8 kg and the weight of the arm system may not exceed 17 kg. The arm reach of the X-ray unit may not exceed 220 cm.

photo 08

Maximum arm reach of intraoral X-ray unit: 220 cm

X-ray adaptor – Ø 24.1 mm – not possible with XO-492 (XO-700)
X-ray adaptor – Ø 25.1 mm – not possible with XO-492 (XO-702)
X-ray adaptor – Ø 30.1 mm – not possible with XO-492 (XO-705)
X-ray adaptor – Ø 32.1 mm – not possible with XO-492 (XO-701)
X-ray adaptor – Ø to be specified – not possible with XO-492 (XO-703)
Extension 160 mm for X-ray adaptor (XO-710), for use together with, for example, Soredex Minray to avoid collision with cup filler

11 Infection control kit XO FLEX

As a supplement to the compulsory preventive service program, an optional infection control kit including suction hoses, cuspidor gold trap and syringe tip is offered.

photo 09

Infection Control Kit for XO FLEX

Infection Control Kit for XO FLEX (XO-466)

12 Patient chair

XO Patient Chair is attached to the side of the unit stand, giving maximum legroom for dentist and dental assistant.
The chair has a backrest with integrated elbow supports and a double articulated neck rest.
The chair base has a joystick for foot controlling chair functions.
Positions: Two programmable working positions (1 and 2), programmable rinse position, zero position and previous position.
The chair has been designed with a hinged backrest and shaped so that the legs of the operators cannot be trapped below the chair when moving downwards.
Security stop while chair is moving by activating foot control or lifting unit instrument.
Height above floor: 51 – 105 cm – measured from floor level to the top of the seat.
Maximum patient weight: 150 kg.

XO Patient Chair – without cushions (AP-500)

12.1 COLORS OF XO Patient CHAIR

Standard XO Patient Chair is supplied in the color Traffic White (RAL 9016/gloss 20).
Traffic White (RAL 9016/gloss 20) (XB-931)
Optional patient chair colors:
Black Grey (RAL 7021/gloss 5) (XB-937)
Mouse Grey (RAL 7005/gloss 5) (XB-943)
Coral Red (RAL 3016/gloss 5) (XB-940)
Ultra-Marine Blue (RAL 5002/gloss 5) (XB-941)
Fern Green (RAL 6025/gloss 5) (XB-942)
Chocolate Brown (RAL 8017/gloss 5) (XB-939)
Please note: Minor differences in color of different parts of the product may occur due to different materials and different paint processes.
Please note: Exposure to sunlight may change colors over time.
Please note: Delivery time for patient chairs in colors other than Traffic White is at least 8 weeks.

RAL 9016
RAL 9016
RAL 7021
RAL 7021
RAL 7005
RAL 7005
RAL 3016
RAL 3016
RAL 5002
RAL 5002
ral-6025
RAL 6025
RAL 8017
RAL 8017

12.2 CUSHIONS FOR XO PATINET CHAIR

The patient chair is available with standard cushions or in a “soft” version with very soft, comfortable cushions with sewn stiches.
The patient chair is upholstered with XO COMFORT fabric with a high-friction comfortable surface that has antibacterial and antifungal properties. XO Comfort fabric complies with the requirements listed in ISO 6875 Dentistry – Patient Chair.
Alternatively, the patient chair may be upholstered with a fabric supplied by the customer. The following dimensions are required: 140 cm x 200 cm. Please note: The fabric must be in accordance with “ISO 6875 Patient Dental Chair” concerning resistance to liquid absorption and flammability.
Standard cushions (AP-789)
Soft cushions (AP-790)
Soft cushions prepared for upholstery with fabric supplied by customer (XO-840)

12.3 fabric colors FOR XO PATIENT CHAIR

Standard color: Black Grey (RAL 7021) (XB-150)
Optional fabric colors:

  • Mouse Grey (RAL 7005) (XB-151)
  • Coral Red (RAL 3016) (XB-152)
  • Ultra-Marine Blue (RAL 5002) (XB-153)
  • Fern Green (RAL 6025) (XB-154)
  • Chocolate Brown (RAL 8017) (XB-155)

 See colors in section 12.1.

12.4 CHILD CUSHION

Child cushion with adjustable knee support with skai upholstery.

child-cushion

Child cushion

Child cushion (XO-813)

13 XO FLEX units – Boxes dimensions and weight 

Box

Dimensions (cm)
L x W x H

Gross weight
(kg)

Unit stand

120 x 72.1 x 140

150 – 170

Arm and instrument bridge

134.4 x 72.4 x 44

35

Operating light

118 x 53 x 40

15

Patient chair

165 x 80 x 56

65

XO SEAT

60 x 60 x 37

10.3

XO STOOL

60 x 60 x 37

14.6

XO HD display incl. arm

93 x 63.8 x 43

19

Steel installation plate

120 x 93 x 18

54 incl. pallet

All boxes are packed on pallets and wrapped before shipment.
A complete XO FLEX unit consist of 2-3 pallets each with maximum dimensions:

Maximum length: 165 cm 
Maximum width: 80 cm
Maximum height: 190 cm

14 XO SEAT & XO STOOL

14.1 GENERAL

XO SEAT & XO STOOL have adjustable seat height and angle as well as a stable base with 5 castors fitted with soft rubber rings.
All metal parts painted in XO Silver (IGP 6802/gloss 20).

14.2 XO SEAT

XO SEAT is a saddle without backrest for sitting in an upright, balanced position.
XO SEAT is available in two versions:

  • For operators taller than 180 cm with a seat height adjustable in the range 60 – 86 cm above the floor
  • For operators shorter than 180 cm with a seat height adjustable in the range 48 – 67 cm above the floor
photo 10

XO SEAT

 

XO SEAT – seat height 60 – 86 cm (XO-858)
XO SEAT – seat height 48 – 67 cm (XO-859)

14.3 XO STOOL

XO STOOL is a “knee stool” where the seat has a “cut out” to allow space for the knee of the other operator, as well as an adjustable backrest.

XO STOOL is available in two versions:

  • For operators taller than 180 cm with a seat height adjustable in the range 60 – 86 cm above the floor
  • For operators shorter than 180 cm with a seat height adjustable in the range 48 – 67 cm above the floor
photo 11

XO STOOL

 

XO STOOL – seat height 60 – 86 cm above floor (XO-868)
XO STOOL – seat height 48 – 67 cm above floor (XO-869

14.4 FOOT-RING

Optionally a foot-ring may be fitted. This enables dentist and dental assistant to sit on the same horizontal level if the height difference between the two is 10 cm or more.
Foot-ring for XO SEAT & XO STOOL (XO-854)

14.5 FABRIC

XO SEAT and XO STOOL are supplied with XO Comfort fabric with a high-friction, comfortable surface that allows the skin to breathe.

Available colors:

  • Black Grey (RAL 7021) (XB-150)
  • Mouse Grey (RAL 7005) (XB-151)
  • Coral Red (RAL 3016) (XB-152)
  • Ultra-Marine Blue (RAL 5002) (XB-153)
  • Fern Green (RAL 6025) (XB-154)
  • Chocolate Brown (RAL 8017) (XB-155)

Alternatively, XO SEAT/XO STOOL may be upholstered with a fabric supplied by the customer.
The following dimensions are required:

  • XO SEAT: 70 cm x 50 cm
  • XO STOOL: 140 x 80 cm

Upholstery with fabric supplied by customer (XO-841)
See colors in sections 1.25 and 12.1.

15 Technical Drawings

15.1 INSTALLATION DRAWING

xo-specs1.png

Installation drawing

Please note: All dimensions in cm. The example is shown with a cabinet depth of 50 cm.

15.2 Dimensions of XO FLEX unit

xo-specs2.png

Dimensions of XO FLEX unit

16 XO SMART LINK


XO SMART LINK is a software user-interface running on a PC connected to an XO unit that expands the functionality of the unit.

Instrument programs containing a pre-defined set of unit instrument parameters for specific dental treatment procedures:

  • Min. speed (motors and turbines) / min. power (scaler)
  • Max. speed (motors and turbines) / max. power (scaler)
  • Speed/power curve (exponential, linear, one-step, two-step) – relation between movement of foot control pedal and speed/power
  • Torque limitation
  • Torque features (auto stop, auto reverse) especially used in endodontic dentistry
  • Spray selection (water – air combination)
  • Amount of spray water
  • XO Instant View enabled/disabled
  • See the active program details as well as a list of programs on XO HD Display
  • Name of active program is shown on the instrument bridge display
  • Hands free selection of instrument programs - change program with two clicks on the foot control
  • Standard programs or user-configured programs

Treatments – sequences of instrument programs:

  • Implantology
  • Endodontic

Individual configuration of programs, treatments and unit functions for multiple users:

  • Working positions 1 and 2 of the patient chair
  • Zero and rinse positions of the patient chair
  • Enable/disable automatic functions (light, cuspidor etc.)
  • Function of foot control and chair base joystick

Plug-ins:

  • User management
  • Stopwatch and alarms
  • XO unit
  • XO Camera Viewer
  • Presentation Viewer
  • File viewer
  • Foot mouse
  • Windows media player
  • Dürr DBSWIN 5.7.1

Other XO Smart Link features:

  • XO Screen User Guide – a user manual shown on an XO HD Display or PC screen
  • Multi-monitor support
  • Exportable user profiles and instrument programs

Languages:

  • English
  • French
  • German
  • Danish

Software:

  • Latest software version is 4.4
  • Requires Microsoft Windows XP or higher

XO SMART LINK FOR XO FLEX (IT-150)

17 XO OSSEO


Brushless two-phase surgical motor for:

  • Jaw surgery
  • Implantology and endodontics (auto stop, auto reverse, reciprocal file movement)


Mechanical power output:
200 W

Torque:
6.5 Ncm

Speed range:
300 – 40 000 rpm

Supplied with:

  • Autoclaveable motor and hose
  • Motor sealing plug


Requires XO-051 Preparation for Peristaltic Pump and XO-053 Peristaltic Pump.

For surgical set-up of XO unit remove all unit instruments and place XO OSSEO on a micro motor suspension.

Please note that XO OSSEO requires XO SMART LINK (on XO FLEX or XO 4-6).

XO OSSEO SYSTEM (XO-050)