Stand-alone high frequency electrosurgery unit for soft tissue surgery with:

  • Maximum output power: 50 W
  • Automatic power-tuning system based on the concept of impedance matching
  • Work frequency: 27 MHz yielding, no neutral electrode necessary



  • On/off control in handpiece
  • Standby and choice between cut and coagulation via touch buttons on the control unit
  • Indication of standby, cut or coagulation by LEDs on the control box



  • Do not used near or on patients with implanted cardiac pacemaker.
  • Do not use near implants1



  • Handpiece, cord, handpiece holder, electrodes and electrode casing can be autoclaved at 135°C
  • Antibacterial powder coat of the control box



  • Control box with automatic power control
  • Power cable
  • Handpiece (black)
  • Handpiece cord (black)
  • Handpiece holder
  • Standard set of electrodes with both straight and loop-shaped electrodes for facial and intraoral surgery, and ball electrodes for coagulation in casing: 220501, 220504, 220510, 220511, 220513, 220514 and 220515


Dimensions of the control box (W x D x H): 17.5 x 24.8 x 5 cm
Packed in box (W x D x H): 40.5 x 20.5 x 11.5 cm
Weight of box: 3.7 kg


XO Odontosurge, 230 V (OSU430)
XO Odontosurge, 115 V (OSU415)


1XO Odontosurge is a monopolar electrosurgical instrument. As such it is not recommended for surgical procedures in the proximity of metallic structures such as dental implants. Contact between an active XO Odontosurge electrode and an implant can result in a heat-induced injury to peri-implant bone, seriously and permanently damaging the osseointegration and leading to the loss of the implant.